FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD.
Foshan Lidexin Machinery Manufacturing Co., LTD., located in Nanhai District of Foshan City, Pearl River Delta, which is economically developed and convenient, is a professional enterprise engaged in
Add to Cart
LDX-020A Automatic TCT Circular Saw Blade Front And Rear Angle Grinding Machine
Operation precautions:
1,Before operation, you must wear protective equipment, such as safety helmet, protective glasses, protective gloves and protective shoes to ensure the safety of the operator.
2,At the same time, check whether the power plug of the device is firmly connected, whether the power cable is damaged, whether the workbench is stable and stable, and whether the grinding disc is correctly and firmly installed.
3,When the gear grinding machine is running, do not leave the working area to avoid accidents. After the operation is completed, the power supply of the gear grinding machine should be turned off in time. Do not operate the gear grinding machine with wet hands to prevent the risk of electric shock.
How to sharpen woodworking saw blades: 1,According to the original angle, grind the front angle mainly, followed by the rear angle.
2,Woodworking saw blade rake angle 5-15 degrees
3,This equipment is specially designed to grind the left and right teeth of woodworking saw blades and multi-blade saw blades.
| Technical parameter: |
| Processing saw blade diameter range: ￠100- ￠800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-100mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 700KG |
| Mechanical dimensions (length x width x height): 1500X1100X1700mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting alloy saw blades and woodworking saw blades. It is easy to operate and can fully extend the service life of TCT saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
