1,It is very important to repair the blade in time when the blade wear reaches 0.2mm, because the blade passivated at work, due to the increase of resistance, it is easy to cause the saw blade jashing, increase the load of the motor, and cause damage to the saw blade and the machine.

2,It is very important to timely repair when the blade wear of the saw alloy reaches 0.2mm, because the saw blade with the edge passivation is working.

3,Due to the increase of resistance, it is easy to cause the saw blade jitter, increase the load of the motor, and cause damage to the saw blade and the machine.

Technical parameters:

Processing saw blade diameter range: ￠200- ￠1200mm

Saw blade aperture: ￠10-220mm

Saw blade thickness (steel plate): 1-12mm

Tooth pitch: 7-110mm

Tooth surface angle: 5 degrees to+20 degrees

Tooth top back angle: 1-20 degrees

Left and right inclination of teeth: tooth tip/tooth surface 20 degrees

Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute

Grinding speed: 0.5-6mm/s

Working speed: maximum 20 teeth/minute

Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm)

Negative chamfer grinding: -15 degrees

Grinding wheel linear speed: 26m/s

Flow rate of coolant water pump: 501/min

Volume of coolant cylinder: 85L

Total power: 1.85 kW

Voltage: three-phase 380v

Mechanical weight: 800KG

Mechanical dimensions (length x width x height): 1600X1100X1800mm

Technical features:

1. This equipment can grind aluminum TCT cutting TCT saw blades, woodworking saw blades, and large alloy saw blades. It is easy to operate and can fully extend the service life of alloy saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers.