FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD.
Foshan Lidexin Machinery Manufacturing Co., LTD., located in Nanhai District of Foshan City, Pearl River Delta, which is economically developed and convenient, is a professional enterprise engaged in
Add to Cart
LDX-020A Factory direct woodworking left and right teeth circular saw blade grinding machine
Lidexin saw blade grinding machine What is the thickness of the granularity of the saw blade:
1,What is the thickness of the particle size of the saw blade of the grinding machine? If the upper and lower cutting mode is used in the processing process, the maximum initial contact surface of the single crystal particles of the high speed steel saw blade can reach the maximum particle tip thickness. On the contrary, when the up and down mode is maintained, the diamond particle thickness increases to the maximum value during the processing.
2,In this condition, the tensile deformation of diamond particles mainly appears at the earliest stage, and the thickness of the tip of the diamond particles is preferably reached and formed. The up and down cutting modes result in very different grinding characteristics. During the next cutting process, taking into account the type of abrasive and binder as well as the cracking or exposure of diamonds, high mechanical impact pulses will occur.
3,In the cutting process, the fracture of the igneous rock is close to the bottom of the diamond particle, mainly because of the low strength of the binding material of the high-speed steel saw blade. Small and hard stone fragments appear after the cutting process.
| Technical parameter: |
| Processing saw blade diameter range: ￠100- ￠800mm |
| Saw blade aperture: ￠ 10-220mm |
| Saw blade thickness (steel plate): 1-12mm |
| Tooth pitch: 7-100mm |
| Tooth surface angle: 5 degrees to+20 degrees |
| Tooth top back angle: 1-20 degrees |
| Left and right inclination of teeth: tooth tip/tooth surface 20 degrees |
| Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute |
| Grinding speed: 0.5-6mm/s |
| Working speed: maximum 20 teeth/minute |
| Grinding wheel size (outer diameter x hole): (￠ 125mm x ￠ 32mmX1mm) |
| Negative chamfer grinding: -15 degrees |
| Grinding wheel linear speed: 26m/s |
| Flow rate of coolant water pump: 501/min |
| Volume of coolant cylinder: 85L |
| Total power: 1.85 kW |
| Voltage: three-phase 380v |
| Mechanical weight: 700KG |
| Mechanical dimensions (length x width x height): 1500X1100X1700mm |
| Technical features: |
| 1. This equipment can grind aluminum TCT cutting alloy saw blades and woodworking saw blades. It is easy to operate and can fully extend the service life of TCT saw blades. Each blade can be reused 15-30 times. This equipment has received praise from many buyers. |
