FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD.
Foshan Lidexin Machinery Manufacturing Co., LTD., located in Nanhai District of Foshan City, Pearl River Delta, which is economically developed and convenient, is a professional enterprise engaged in
Add to Cart
LDX-Carbide saw blade manual high frequency tooth welding machine
TCT saw blade welding How to make welding easier:
1,The welding technology of the alloy is very superb, it is different from the welding of common metals such as iron and steel, the adhesion of the alloy is very poor, and the grain must be fully welded.
2,The working conditions of carbide saw blades are relatively harsh, high speed, vibration, high temperature on the welding of the alloy cutter head put forward harsh requirements, with the cutting speed of the saw blade and the continuous improvement of the amount of feed, the requirements for the weld strength of the carbide saw blade are also getting higher and higher, the development of tungsten carbide saw blade brazing technology is also changing with each passing day.
3,Resistance brazing, induction brazing, separate manufacturing machinery Mosaic. General Trending manufacturing small size milling or turning tools, its J: art characteristics can avoid the steel matrix and the matrix material linear expansion coefficient difference caused by the thermal tension,
|
Technical Parameters: |
| 1. Tooth diameter range: ¢100-¢800mm |
| 2. Maximum input power: 4KW |
| 3. Oscillation frequency: 100-250KHZ |
| 4. Heating current: 200-400A |
| 5. Holding current: 200-400A |
| 6. Input voltage: single phase 220V 50HZ |
| 7. Load continuation rate: 80% |
| 8. Heating, heat preservation and cooling time: 0.1-9.9S |
| 9. Cooling water requirement: 0.2MPa 2L/min |
| 10. Weight: 18KG |
| 11. Volume: 850 long X600 wide X1000high |
| Application: Carbide saw blade welding, etc. |
